Temperature sensors are manufactured in many shapes and designs, both resistive (PT 100, PT 1000) and classic welded thermocouples with any outlet design. The sensor is custom made, the sensor can be in brass or stainless steel cube, tube etc. Different in material and shape. We can design the shape based on a photo, sketch, sample, or description.
| Thermocouple Type | Metals used | Temperature range (°C) |
|---|---|---|
| B | Pt-30% Rh + Pt-6% Rh | 0 up 1820 |
| E | Ni-Cr alloy+ Cu-Ni alloy | -270 up 1000 |
| J | Fe + Cu-Ni alloy | -210 up 1200 |
| K | Ni-Cr alloy+ Ni-Al alloy | -270 up 1372 |
| N | Ni-Cr-Si alloy+ Ni-Si-Mg alloy | -270 up 1300 |
| R | Pt-13% Rh + Pt | -50 up 1768 |
| S | Pt-10% Rh + Pt | -50 up 1768 |
| T | Cu + Cu-Ni alloy | -270 up 400 |
Example of application: Temperature measurement for regulation and indication. Due to the minimal dimensions, the thermocouple can be placed inside the heater.
Temperature: up to 1820°C
6-12 MONTH WARRANTY
Our products are warranted for up to 1 year from the date of receipt.
PRODUCTION QUALITY
In the manufacturing process, we follow technological procedures and rules to ensure the production of the highest quality. The production process includes checkpoints that allow us to regulate the production process and thus improve the quality level.
PRICE VS. ORIGINAL
Custom production allows the production of elements with almost any parameters, both geometrical and electrical; it is, therefore, possible to replace the existing heating element with a non-original replacement. You can request a list of affordable type substitutes. Also, you can send us documentation, a photo, or a physical sample and we’ll suggest a solution for you.
SPEED
Time is money – we normally keep delivery terms at a weekly level. If necessary, the term can be shortened (surcharge) or special delivery terms can be agreed. All activities from the offer, through design, calculation and production are minimized with regard to the speed of the entire order.
We produce a wide range of heating elements. Heating elements are divided into heating strips, heating cartridges and other types.
We produce custom-made heating elements according to your requirements.
We are not limited by a predetermined range, therefore, we respond flexibly to your needs and wishes.
We offer technical advice to help you find the optimal solution
Contact
ELKOP Technik s.r.o.
Skřivánčí 4769/38
466 01 Jablonec nad Nisou
Co. Reg. No.: 01598171
VAT Reg. No.: CZ01598171
Tel.: +420 483 305 349
Fax: +420 483 306 076
E-mail: info@elkop.cz